how to clean shin guards

Shin guards are essential for any footballer. Not only do they protect your shins from impact, but they also help to prevent injuries. However, with all the mud and sweat that gets on them during a match, it’s no surprise that they can get pretty grubby! So, how do you wash and clean shin guards? In this article, we’ll give you some tips on how to keep them clean and fresh. From soaking them in soapy water to using a toothbrush to scrub away dirt, we’ve got you covered.

What You Will Need

In order to wash and clean shin guards, you will need the following items:

-A mild soap or detergent
-A soft sponge or cloth
-A toothbrush (optional)
-A clean, dry towel

First, wet the sponge or cloth with warm water. Add a small amount of mild soap or detergent to the sponge or cloth, and then rub the shin guards with it to remove any dirt or grime. If there are any tough stains, you can use a toothbrush to scrub them. Rinse the shin guards with clean water, and then pat them dry with a clean, dry towel.

Step One: Pre-Wash Your Shin Guards

Before you wash your shin guards, it’s important to pre-wash them. This will remove any dirt or debris that could potentially damage your washing machine. To pre-wash your shin guards, simply rinse them off with warm water and mild soap. Once they’re rinsed, you can proceed to the next step.

Step Two: Wash Your Shin Guards

Be sure to wash your shin guards every few uses, or at least once a week. Depending on how often you play, you may need to wash them more frequently.

1. Wet your shin guards with warm water and add a small amount of mild soap. You can use a soft cloth or sponge to help work the soap into the guards.
2. Gently scrub the shin guards, paying special attention to any areas that are especially dirty or have build-up. A toothbrush can be helpful for getting into hard-to-reach areas.
3. Rinse the soap off of the shin guards with warm water. Be sure to rinse all of the soap off so it doesn’t irritate your skin when you wear them next.

Step Three: Dry Your Shin Guards

After you’ve rinsed your shin guards, it’s time to dry them off. The best way to do this is to remove the straps and let them air dry. You can also use a towel to help remove any excess water. Once they’re dry, you can reattach the straps and put them away.

Additional Tips and Tricks

In addition to the above tips, here are a few more tricks to get those shin guards clean and fresh-smelling:

-Soak in vinegar: For really tough stains, soak your shin guards in a solution of 1 part vinegar to 3 parts water. Let them sit for 30 minutes before rinsing them with cold water.

-Use laundry detergent: If the vinegar solution doesn’t do the trick, try using a mild laundry detergent on your shin guards. Be sure to rinse thoroughly afterwards.

-Deodorize with baking soda: To help remove any lingering odors, sprinkle baking soda on your shin guards and let them sit for an hour or so before brushing them off.

Can You Put Shinpads In Wash?

You can put shin pads in the washer, but make sure to use a gentle cycle and cold water. You should also air dry them or put them in the dryer in a low heat setting. If your shin pads have removable straps, take them off before washing them.

How Do You Clean Shin Guards And Gloves?

It is important to clean your shin guards and gloves after each use. This will remove any dirt, sweat, or oils that can cause irritation or infection.

To clean your shin guards, first, remove any loose debris with a brush or cloth. Then, rinse the guards in cool water and mild soap. Next, scrub the guards with a soft brush to remove any remaining dirt. Finally, rinse the guards again in cool water and allow them to air dry.

To clean your gloves, first, remove any loose debris with a brush or cloth. Then, rinse the gloves in cool water and mild soap. Next, scrub the gloves with a soft brush to remove any remaining dirt. Finally, rinse the gloves again in cool water and allow them to air dry.

How Often Should You Replace Shin Guards?

If you play soccer or another sport that requires the use of shin guards, you know how important it is to keep them clean. But how often should you replace them?

Here are a few things to keep in mind when deciding how often to replace your shin guards:

1. The type of shin guard.

There are two main types of shin guards: hard and soft. Hard shin guards are made of plastic and offer more protection, while soft shin guards are made of foam and offer more comfort. Depending on the type of shin guard you have, you may need to replace it more or less often.

2. How often do you play?

If you play soccer regularly, you will need to replace your shin guards more often than someone who only plays once in a while. The more wear and tear they experience, the faster they will break down and need to be replaced.

3. How well you take care of them.

If you take good care of your shin guards, they will last longer than if you neglect them. Be sure to clean them after each use and store them properly when not in use.

Generally speaking, you should replace your shin guards every six months to one year, depending on the factors mentioned above. However, it’s always a good idea to inspect your shin guards before each use and replace them if they show any signs of wear or damage.

How Do You Dry Shin Guards?

Drying your shin guards is just as important as washing them. If you don’t dry them properly, they can develop mold and mildew. Here’s how to do it:

-Remove the pads from your shin guards.
-Wipe down the pads with a clean, dry cloth.
-Turn the pads upside down and allow them to air dry completely.
-Once the pads are dry, reattach them to your shin guards.
-Hang your shin guards up to air dry. Do not put them in direct sunlight, as this can damage the plastic.
-Once they are completely dry, store them in a cool, dry place until you are ready to use them again.

How Do You Wash Shin Guards In Mma?

MMA shin guards are made of different materials than other types of shin guards. You need to take care when washing them so you don’t damage the material.

The best way to wash your MMA shin guards is by hand. Use mild soap and cool water. Don’t use hot water, as this can damage the material. Rinse your shin guards well and then air dry them.

Don’t put your MMA shin guards in the washing machine or dryer. This will damage them.


We hope that this article has provided you with some helpful tips on how to wash and clean your shin guards. With proper care, your shin guards will last longer and perform better. Be sure to follow the manufacturer’s instructions when cleaning your shin guards, as they may have specific recommendations. Do you have any other tips for cleaning shin guards? Share them with us in the comments below!

Similar Posts