How To Get The Plastic Cover Off A Skateboard Wheel? 7 Easy Steps

It can be really frustrating when you’re trying to remove the plastic cover from a skateboard wheel and it just won’t budge. You might be tempted to use a sharp object or your teeth, but that’s definitely not the best idea. Fortunately, there is a way to remove the plastic cover without damaging the wheel. All you need is a bit of patience and some simple household tools. In this blog post, we’ll walk you through the steps on how to get the plastic cover off a skateboard wheel.

Step One: Take the Skateboard Deck Off the Wheels

If you want to get the plastic cover off a skateboard wheel, the first step is to take the skateboard deck off the wheels. This will give you access to the wheel and make it easier to remove the cover.

To take the deck off the wheels, start by loosening the screws that hold the deck in place. Once the screws are loose, you can remove the deck from the wheels. Be careful not to lose any of the screws!

Once you have removed the deck, you should be able to see the center of the wheel. The cover is located on this part of the wheel. To remove it, simply peel it off or use a sharp object to pry it off.

With the cover removed, you can now see the inside of the skateboard wheel!

Step Two: Remove the Bearings from the Wheels

To remove the bearings from your skateboard wheels, you will need a bearing removal tool. You can purchase these tools online or at your local skate shop.

Once you have the tool, insert it into the centre of the bearing and twist it to loosen and remove the bearing from the wheel. Repeat this process for each bearing on each wheel.

Step Three: Take the Wheels Off the Axles

If you’re still having trouble getting the plastic cover off your skateboard wheel, you can try taking the wheels off the axles. This will give you more room to work with and make it easier to get a good grip on the cover.

To do this, first, loosen the axle nut with a skate tool or a wrench. Once it’s loose, you should be able to pull the axle out of the wheel. Be careful not to lose any of the parts – keep them all together so you can put them back on later.

With the wheels off the axles, you should be able to get a better grip on the plastic covers and pull them off relatively easily. If they’re still being stubborn, you can try using a sharp object (like a knife or a pair of scissors) to help pry them off.

Step Four: Unscrew the Nuts and Bolts Holding the Plastic Cover in Place

In order to get the plastic cover off a skateboard wheel, you will need to unscrew the nuts and bolts that are holding it in place. This can be done with a Phillips head screwdriver. Once you have unscrewed all of the nuts and bolts, you should be able to remove the plastic cover easily.

Step Five: Remove the Plastic Cover

To remove the plastic cover from a skateboard wheel, follow these steps:

1. Step Five: Remove the Plastic Cover

2. Use a Phillips head screwdriver to remove the screws that hold the plastic cover in place.

3. Carefully pry the cover off of the wheel.

4. Enjoy your new, uncovered skateboard wheel!

Step Six: Clean the Wheels and Reattach Them to the Skateboard Deck

Assuming you have already followed the first five steps in this guide, it is now time to clean the wheels and reattach them to the skateboard deck.

To clean the wheels, simply use a cloth or brush to remove any dirt or debris that may be on them. Once they are clean, dry them off completely before moving on to the next step.

To reattach the wheels to the skateboard deck, you will need to use the bolts that came with your skateboard. First, insert the bolts through the holes in the deck and then screw them into the corresponding holes in the wheels. Make sure that they are tight so that the wheels do not come off while skating.

Now that you have followed all six steps, your skateboard should be ready to ride! Enjoy and happy skating!

Step Seven: Put the plastic cover back on the skateboard wheel

The seventh and final step is to put the plastic cover back on the skateboard wheel. This can be a bit tricky, but with a little patience it can be done. First, align the holes in the cover with the spokes on the wheel.

Then, gently push the cover onto the wheel until it is snug. Once the cover is in place, use a Phillips head screwdriver to tighten or loosen the screws as needed.

Now that the skateboard wheel is fully assembled, it is ready to be installed on the skateboard.

If you have any questions about this process, or if you need help with anything, feel free to contact us and we will be happy to assist you.

How Do You Take Off A Wheel Without A Skate Tool?

The best way to remove a wheel without a skate tool is to use a pair of pliers.

Place the pliers on the outside of the axle nut and twist counterclockwise.

Once the nut is loose, remove it by hand. Pull the wheel off of the axle and set it aside.

How Do You Remove The Graphics From A Skateboard Wheel?

There is no easy way to remove the graphics from a skateboard wheel.

You can try to scrape it off with a razor blade or sandpaper, but it will be very difficult to get all of the graphics off.

You may be able to find a product that will remove the graphics, but it will likely damage the wheel.

How Do You Remove A Wheelbite?

There are a few ways to remove a wheelbite. One way is to use a file or a rasp to remove material from the inside of your skateboard deck until the wheel no longer rubs.

Another way is to use special spacers that go between your trucks and wheels to raise them up slightly.

You can also try adjusting your trucks so that they are tighter or looser. By doing this, you can change the angle at which your wheels sit in relation to your deck, which may help to prevent wheelbite.

Are Skateboard Wheels Supposed To Be Plastic?

Skateboard wheels are made of polyurethane, which is a type of plastic. The hardness of the skateboard wheel is determined by the durometer, which is measured on the A scale. The higher the number, the harder the wheel. Most skateboard wheels are between 75A and 90A.

Skateboard wheels can be made of different materials, including plastic, metal, or even wood. However, most skateboard wheels are made of plastic because it is a lightweight material that can provide good grip and durability.

Conclusion

If you’re new to skateboarding, or even if you’ve been skating for a while but never changed your own wheels, you might be wondering how to get the plastic cover off of a skateboard wheel. It’s actually not as difficult as it may seem, and in most cases, all you need is a Phillips head screwdriver. With a little bit of patience and some careful maneuvering, you can have those wheels off in no time. Just follow these ten steps and you’ll be good to go.